Top 10 Machinery Stocks For 2014

"History must repeat itself because we pay such little attention to it the first time." (Blackie Sherrod, sportswriter born 1919 and still "kicking")

On April 8th, we learned that General Electric (GE) would be acquiring Lufkin Industries (LUFK). The deal is one of the three largest in the oilfield machinery and equipment industry during the past decade, and sets the stage for further acquisitions in this sector. Investors should start considering which companies might be next.

Bloomberg had been saying since September 2012 that LUFK was a takeover target when its stock had fallen to the lowest price in 3 years. "Lufkin will more than double GE's share of the artificial lift segment and give it about 15 percent market share," Julian Mitchell, an analyst at Credit Suisse in New York wrote in a note to clients.

Companies like GE have access to billions of dollars at low-to-zero interest rate cost-of-borrowing. The LUFK deal is only one of the energy-related purchases that it has been making, and it won't be the last. That's why I've written this article, so we investors can begin looking for the next likely takeover targets of companies like GE and Exxon Mobil (XOM).

Best Gas Companies To Watch For 2015: Cummins Inc.(CMI)

Cummins Inc. designs, manufactures, distributes, and services diesel and natural gas engines, electric power generation systems, and engine-related component products worldwide. It operates in four segments: Engine, Power Generation, Components, and Distribution. The Engine segment offers a range of diesel and natural gas powered engines under the Cummins and other customer brand names for the heavy-and medium-duty truck, bus, recreational vehicle, light-duty automotive, agricultural, construction, mining, marine, oil and gas, rail, and governmental equipment markets. This segment also provides new parts and service, as well as remanufactured parts and engines. The Power Generation segment offers power generation systems, components, and services, including diesel, natural gas, gasoline, and alternative-fuel electrical generator sets for use in recreational vehicles, commercial vehicles, recreational marine applications, and home stand-by or residential applications. This segment also provides components that make up power generation systems, such as engines, controls, alternators, transfer switches, and switchgears. The Components segment supplies filtration products, turbochargers, aftertreatment systems, intake and exhaust systems, and fuel systems for commercial diesel applications. This segment offers filtration and exhaust systems for on-and off-highway heavy-duty and mid-range equipment, as well as supplies filtration products for industrial and passenger car applications. This segment also develops after treatment and exhaust systems to help customers meet emissions standards and fuel systems. The Distribution segment provides parts and services, as well as service solutions, including maintenance contracts, engineering services, and integrated products. The company sells its products to original equipment manufacturers, distributors, and other customers. Cummins Inc. was founded in 1919 and is headquartered in Columbus, Indiana.

Advisors' Opinion:

• [By James E. Brumley]

  To give credit where it's due, Tesla Motors Inc. (NASDAQ:TSLA) has been the one company to make electric vehicles a viable reality, melding coolness and functionality - even if not affordability - into an automobile that people will like, and buy. Yet, although TSLA shares are understandably priced relative to the company's sales and potential future earnings, investors and consumers alike may be errantly holding Tesla up as the harbinger of the electric vehicle era. The fact of the matter is, EV's are still a miniscule part of the auto market, and due to a lack of capacity and materials needed to put an electric car in every driveway, the real opportunity for carmakers like Honda Motor Co Ltd (NYSE:HMC) or Toyota Motor Corp (NYSE:TM) is to radically improve the efficiency of existing technologies like the combustion engine. Thing is, with the help of companies like Cummins Inc. (NYSE:CMI) and HydroPhi Technologies Group, Inc. (OTCMKTS:HPTG), names like Honda and Toyota really are making big strides in auto motor efficiency, with the biggest of those recent strides being made in the diesel arena. All joking aside, Tesla and other electric vehicle manufactures may want to look over their shoulder and see how quickly the diesel market is gaining on them.

• [By Neha Chamaria]

  PACCAR's earnings release is important for two reasons. One, it tells a good deal about the shape of things in the trucking industry. Two, as Cummins' (NYSE: CMI  ) largest customer, PACCAR can also give investors an idea of what to expect from Cummins' quarterly numbers, which will be up about a week later.

Top 10 Machinery Stocks For 2014: Rockwell Automation Inc.(ROK)

Rockwell Automation, Inc. provides industrial automation power, control, and information solutions. It operates in two segments, Architecture and Software, and Control Products and Solutions. The Architecture and Software segment offers control platforms that perform multiple control disciplines and monitoring of applications, including discrete, batch and continuous process, drives control, motion control, and machine safety control; and products comprising controllers, electronic operator interface devices, electronic input/output devices, communication and networking products, and industrial computers. This segment also offers software products, such as configuration and visualization software used to operate and supervise control platforms, advanced process control software, and manufacturing execution software to enhance manufacturing productivity and meet regulatory requirements; and rotary and linear motion control products, and sensors and machine safety components . The Control Products and Solutions segment provides low and medium voltage electro-mechanical and electronic motor starters, motor and circuit protection devices, AC/DC variable frequency drives, push buttons, signaling devices, termination and protection devices, relays and timers, and condition sensors; and packaged solutions, such as configured drives and motor control centers to automation and information solutions, as well as life-cycle support services. The company sells its products, solutions, and services primarily under the Rockwell Automation, Allen-Bradley, A-B, and Rockwell Software brand names to the food and beverage, transportation, oil and gas, metals, mining, home and personal care, pulp and paper, and life sciences markets through independent distributors and direct sales force in the United States, Canada, Europe, the Middle East, Africa, the Asia Pacific, and Latin America. Rockwell Automation, Inc. was founded in 1928 and is headquartered in Milwaukee , Wisconsin.

Advisors' Opinion:

• [By Blake Bos]

  In the following video, Fool consumer-goods/industrials analyst Blake Bos breaks down Aviation Week's top aerospace and defense picks by annual revenue. His discussion includes Cubic (NYSE: CUB  ) , Rockwell Automation (NYSE: ROK  ) , Exelis (NYSE: XLS  ) , Boeing (NYSE: BA  ) , and Lockheed Martin (NYSE: LMT  ) .

Top 10 Machinery Stocks For 2014: Flowserve Corp (FLS)

Flowserve Corporation, incorporated on May 1, 1912, is a manufacturer and aftermarket service provider of flow control systems. The Company develops and manufacture precision-engineered flows control equipment integral to the movement, control and protection of the flow of materials in its customers' critical processes. The Company operates in three segments: Engineered Product Division (EPD), which includes long leads time, custom and other engineered pumps and pump systems, mechanical seals, auxiliary systems and replacement parts and related services, Industrial Product Division (IPD), which includes pre-configured engineered pumps and pump systems and related products and services, and Flow Control Division (FCD), which includes engineered and industrial valves, control valves, actuators and controls and related services. Effective December 10, 2013, Flowserve Corp acquired Innovative Mag-Drive LLC.

Through the Company's manufacturing platform and global network of Quick Response Centers (QRCs), the Company offers an array of aftermarket equipment services, such as installation, advanced diagnostics, repair and retrofitting. The Company's product portfolio of pumps, valves, seals, automation and aftermarket services supports global infrastructure industries, including oil and gas, chemical, power generation and water management, as well as certain general industrial markets where the Company's products and services add value. The Company sells its products and services to more than 10,000 companies, including some of the engineering, procurement and construction firms (EPC), original equipment manufacturers, distributors and end users.

Engineered Product Division

The Company designs, manufactures, distributes and services engineered pumps and pumps systems, mechanical seals, auxiliary systems, replacement parts and related equipment. The business primarily consists of long lead time, engineered, configured products, which require extensive test requirements a! nd project management skills. EPD products and services are primarily used by companies that operate in the oil and gas, power generation, chemical, water management and general industries. The Company markets its pump and mechanical seals products through its global sales force and its regional QRCs and service and repair centers or through independent distributors and sales representatives. A portion of the Company's mechanical seal products are sold directly to original equipment manufacturers for incorporation into rotating equipment requiring mechanical seals. The Company's pump products are manufactured in a range of metal alloys and with a variety of configurations to meet the critical operating demands of the Company's customers.

The Company also manufactures a gas-lubricated mechanical seal that is used in high-speed compressors for gases pipelines and in the oil and gas production and process markets. The Company's products are manufactured at 29 plants worldwide, nine of which are located in Europe, 11 in North America, four in Asia Pacific and five in Latin America. The Company also conducts business through strategic foreign joint ventures. The Company has six unconsolidated joint ventures that are located in China, India, Japan, Saudi Arabia, South Korea and the United Arab Emirates, where a portion of its products are manufactured, assembled or serviced in these territories. The Company manufactures more than 40 different active types of pumps and approximately 185 different models of mechanical seals and sealing systems.

The Company's EPD products include between bearings pumps, which include single case- axially split, single case- radially split, double case; overhung pumps, which includes api process; positive displacement pumps, which includes multiphase, reciprocating and screw; mechanical seals and seal support systems, which includes gas barrier seals and dry-running seals, and specialty products, which includes nuclear pumps, nuclear seals, cryogenic p! umps, cry! ogenic liquid expander, hydraulic decoking systems, and API slurry pumps. The Company�� EPD Brand Names include BW Seals, Byron Jackson, Calder Energy Recovery Devices, Cameron, Durametallic, Five Star Seal, Jeumont-Schneider, and Interseal. EPD Services includes provision of engineered aftermarket services through its global network of 128 QRCs, some of which are co-located in manufacturing facilities, in 41 countries. Its EPD service personnel provide a comprehensive set of equipment services for flow management control systems, including installation, commissioning, repair, advanced diagnostics, re-rate and retrofit programs, machining and comprehensive asset management solutions. The Company provides asset management services and condition monitoring for rotating equipment through special contracts with many of its customers that reduce maintenance costs.

Industrial Product Division

The Company designs , manufactures, distributes and services pre-configured engineered pumps and pumps systems, including submersible motors, for industrial markets. IPD's standardized, general purpose pump products are primarily utilized by the oil and gas, chemical, water management, power generation and general industries. The Company's products are manufactured in 12 manufacturing facilities, three of which are located in the United States and six in Europe. IPD operates 20 QRCs worldwide, including 11 sites in Europe, three in the United States , five in Asia Pacific and one in Latin America. The Company manufactures approximately 40 different active types of pumps available in a wide range of metal alloys and non-metallics with a variety of configurations. The products includes Overhung, which includes Chemical Process ANSI and ISO, Industrial Process , and Slurry and Solids Handling ; Specialty Products, which includes Molten Salt VTP Pump, Submersible Pump, Thruster, Geothermal Deepwell, and Barge Pump; Between Bearings, which includes Single Case- Axially Split and Single Case- Radia! lly Split! ; Vertical, which includes Wet Pit, Deep Well Submersible Motor, Slurry and Solids Handling, and Sump; Positive Displacement, which includes Gear. The Company�� brands include Aldrich, Durco, IDP, Pacific, Pleuger, Scienco, Sier Bath, Western Land Roller, TKL, Worthington, and Worthington-Simpson. The Company markets its pump products through its worldwide sales force and its regional service and repair centers or through independent distributors and sales representatives. The Company provide an array of aftermarket services including product installation and commissioning services, spare parts, repairs, re-rate and upgrade solutions, advanced diagnostics and maintenance solutions through its global network of QRCs.

Flow Control Division

The Company�� FCD designs, manufactures, distributes and services a portfolio of industrial valve and automation solutions, including isolation and control valves, actuation, controls and related equipment. In addition, FCD offers energy management products, such as steam traps, boiler controls and condensate and energy recovery systems. FCD products are used to control, direct and manage the flow of liquids and gases and are an integral part of any flow control system. The Company's valve products are often customized and engineered to perform specific functions within each customer's unique flow control environment. The Company's flow control products are primarily used by companies operating in the chemical (including pharmaceutical), power generation (nuclear, fossil and renewable), oil and gas, water management and general industries (including aerospace, pulp and paper and mining). FCD has 58 sites worldwide, including 25 principal manufacturing facilities ( five of which are located in the United States and 13 of which are located in Europe) and 33 QRCs, including three consolidated joint ventures. A small portion of the Company's valves are also produced through an unconsolidated joint venture in India.

The Company's pr! oducts ar! e used in a variety of applications, from general service to the severe and demanding services, including those involving high levels of corrosion, extreme temperatures and/or pressures, zero fugitive emissions and emergency shutdown. The Company's smart valve and diagnostic technologies integrate sensors, microprocessor controls and software into high performance integrated control valves, digital positioners and switchboxes for automated on/off valve assemblies and electric actuators. These technologies permit real-time system analysis, system warnings and remote indication of asset health. These technologies have been developed in response to the growing demand for reduced maintenance, improved process control efficiency and digital communications at the plant level. The Company's valve automation products encompass a range of pneumatic, electric, hydraulic and stored energy actuation designs to take advantage of whatever power source the customer has available.

The Company�� products includes valve automation systems, control valves, ball valves, gate valves, globe valves, check valves, lined plug valves, lubricated plug valves, diagnostic software, digital positioners, pneumatic positioners, intelligent positioners, pneumatic actuators, hydraulic actuators, diaphragm actuators, direct gas and gas-over-oil actuators. steam traps, boiler controls, digital communications, and valve and automation repair services. The Company�� brands include Accord, Anchor/Darling, Argus, Atomac, Durco, Edward, Flowserve, Gestra, Kammer, Limitorque, McCANNA/MARPAC, NAF, NAVAL, Noble Alloy, Norbro, Nordstrom, PMV, Serck Audco, Schmidt Armaturen, Valbart, Valtek, Vogt, and Worcester Controls. The Company provides equipment maintenance services for flow control systems, including advanced diagnostics, repair, installation, commissioning, retrofit programs and field machining capabilities.

The Company competes with Sulzer Pumps, Ebara Corp., SPX Corp., Eagle Burgmann, A. W. Chesterton Co. an! d AES Cor! p, John Crane Inc., and Weir Group Plc, ITT Industries, KSB Inc., Sulzer Pumps, Pentair Ltd., Cameron International Corp., Emerson Electric Co., General Electric Co. and Crane Co.

Advisors' Opinion:

• [By Damon Churchwell]

  Increasing sales and margins
  A second, even larger, flow technology company to consider is Flowserve (NYSE: FLS  ) . The company's flow control systems are utilized by a wide range of industries, led by oil & gas, chemicals, and power generation.

Top 10 Machinery Stocks For 2014: Mueller Water Products Inc (MWA)

Mueller Water Products, Inc., incorporated on September 22, 2005, is a manufacturer and marketer of products and services used in the transmission, distribution and measurement of water. The Company�� product portfolio includes engineered valves, fire hydrants, pipe fittings, water meters, leak detection and pipe condition assessment which are used by municipalities, as well as the residential and non-residential construction industries. The Company operates in two segments: Mueller Co. and Anvil. Mueller Co. The Company�� valve or fire hydrant products are specified for use in the 100 metropolitan areas in the United States.

Mueller Co.

Mueller Co. manufactures valves for water and gas systems, including iron gate, butterfly, tapping, check, plug and ball valves, as well as dry-barrel and wet-barrel fire hydrants and a of pipe repair products, such as clamps and couplings used to repair leaks. The Company offers residential and commercial metering products and systems and leak detection and pipe condition assessment products and services. Mueller Co. products are sold through waterworks distributors.

The Company�� fire hydrants consist of an upper barrel and nozzle section and a lower barrel and valve section that connects to a water main. In dry-barrel hydrants, the valve connecting the barrel of the hydrant to the water main is located below ground at or below the frost line, which keeps the hydrant upper barrel dry. It sells dry-barrel fire hydrants with the Mueller and U.S. Pipe Valve and Hydrant brand names in the United States and the Mueller and Canada Valve brand names in Canada. The Company also makes wet-barrel hydrants, where the valves are located in the hydrant nozzles and the barrel contains water at all times. It also makes wet-barrel hydrants, where the valves are located in the hydrant nozzles and the barrel contains water at all times.

Mueller Co. manufactures a variety of intelligent water technology products under the Mue! ller Systems and Hersey Meters brand names that are designed to help water providers accurately measure water usage. These products include water meters, advanced metering infrastructure systems and automated meter reading products, have the capability to measure water usage ranging from small residential flows to large commercial and industrial applications.

Mueller Co. offers leak detection and pipe condition assessment products and services under the Echologics brand name. Other products include pipe repair products, such as clamps and couplings used to repair leaks and municipal castings, such as manhole covers and street drain grates. It sells these products under the Mueller and Jones brand names.

The Company competes with McWane, Inc., American Cast Iron Pipe Company, The Ford Meter Box Company, Inc., A.Y. McDonald Mfg, Sensus, Neptune Technology Group, Inc., Badger Meter, Inc., Aclara LLC and Itron, Inc.

Anvil

Anvil manufactures and sources a range of products, includes fittings, couplings, hangers, valves and related products for use in many non-residential constructions for HVAC, fire protection, energy and oil and gas applications. Anvil's products are sold through distributors who then sell the products to a variety of end users. These distributors are serviced primarily through Anvil's distribution centers.

Fittings and Couplings manufactures threaded and grooved pipe fittings and couplings. Pipe fittings and couplings join two pieces of pipe together. The five categories of pipe fittings and couplings are cast iron fittings, malleable iron fittings and unions, grooved fittings, couplings and valves, threaded steel pipe coupling and nipples. Hangers, manufacture an array of pipe hangers and supports. Standard pipe hangers and supports are used in fire protection sprinkler systems and HVAC applications where the objective is to provide rigid support from the building structure.

The Company competes with Ward Man! ufacturin! g L.L.C., malleable iron fittings, Victaulic Company, Tyco International Ltd., ERICO International Corporation, Cooper Industries plc and Carpenter & Paterson, Inc.

Advisors' Opinion:

• [By Travis Hoium]

  What: Shares of Mueller Water Products (NYSE: MWA  ) jumped as much as 17% today after the company released earnings.

  So what: Fiscal-second-quarter revenue jumped 12.6% to $283.1 million and net income was $6.2 million, or $0.05 per share. Analysts only expected revenue to be $270.8 million and earnings of $0.02 per share so this was well ahead of estimates. �

Top 10 Machinery Stocks For 2014: Sterling Consolidated Corp (STCC)

Sterling Consolidated Corp., incorporated on January 31, 2011, is a holding company. The Company�� operations are conducted through its four subsidiaries: Sterling Seal & Supply, Inc. (Sterling Seal), ADDR Properties, LLC (ADDR), Q5 Ventures, LLC (Q5), and Integrity Cargo Freight Corporation (Integrity). The Company through its subsidiary, Sterling Seal engages primarily in the distribution and sale of O-rings, rubber seals, oil seals, custom molded rubber parts, custom Teflon parts, Teflon rods, O-ring cord, bonded seals, O-ring kits, and stuffing box sealant. The Company also owns real property through its subsidiaries ADDR and Q5. In addition, the Company�� subsidiary Integrity Cargo Freight Corporation (Integrity) is a freight forwarding business. In September 2013, the Company announced the acquisition of Superior Seals and Service in High Point, NC.

Sterling Seal sells directly to smaller distributors and original equipment manufacturers in need of seals. It offers a catalogue of standard sizes, and will take orders for special sizes not available in the standard catalogue. O-rings and the other products that Sterling Seal sells are used in a variety of industries, including automotive, pump, transmissions, oil and energy, machinery, and packaging. Integrity are primarily responsible for transporting products the Company order from its suppliers back to its warehouse in Neptune, NJ. After Sterling Seal confirms from its supplier that a product is ready to be picked up, Integrity Cargo is responsible for picking up the products and getting them to the dock and delivered to the Sterling Seal warehouse. ADDR owns a 28,000 square foot facility in Neptune, NJ. Q5 Ventures, LLC owns a 5,000 square foot facility in Apopka, Florida, which is used by Sterling Seal for its Florida operations.

Advisors' Opinion:

• [By Peter Graham]

  Small cap stocks Pulse Network Inc (OTCBB: TPNI), Sterling Consolidated Corp (OTCBB: STCC) and diaDexus, Inc (OTCMKTS: DDXS) have or could start to sizzle for investors. However, I should also mention that two of these stocks have been the subject of paid promotions while a third apparently has not been, and could be the real deal. With that in mind, here is a closer look along with a quick reality check about all three small caps to help you decide whether they are hot or not:

• [By Peter Graham]

  Small cap stocks Muscle Warfare International (OTCMKTS: MWAR), Portlogic Systems Inc (OTCMKTS: PGSY) and Sterling Consolidated Corp (OTCBB: STCC) were all the subject of a few paid promotions as recently as last week but they sure did not start the new week out right because all were sinking on Monday. So are these small cap stocks that are either the subject of promotions or investor awareness campaigns hot or not? Here is a quick reality check:

Top 10 Machinery Stocks For 2014: GT Advanced Technologies Inc (GTAT)

GT Advanced Technologies Inc., incorporated on September 27, 2006, is diversified technology company with crystal growth equipment and solutions for the global solar, light emitting diode (LED) and electronics industries. The Company operates in three segments: its polysilicon business, its photovoltaic (PV), business and its sapphire business. The Company's principal products are Silicon Deposition Reactors (SDR) and related equipment used to produce polysilicon, the key raw material used in silicon-based solar wafers and cells; Advanced sapphire crystallization furnaces (ASF) which are used to crystallize sapphire boules, and Directional solidification (DSS) furnaces and related equipment used to cast multicrystalline and MonoCast crystalline silicon ingots. On January 7, 2013, the Company announced the idling of its HiCz pilot manufacturing facility in Hazelwood, Missouri. On November 8, 2012, the Company acquired certain assets of Twin Creeks Technologies, Inc. (Twin Creeks). In May 2013, the Company acquired the business of Thermal Technology LLC.

PV Business

The focus of the Company's PV business is the development, manufacture and sales of crystallization growth furnaces to produce silicon ingots used in the production of solar wafers. The Company's principal product line has been the DSS family of casting furnaces that are used to produce multicrystalline ingots and MonoCast ingots. As of December 31, 2012, the Company shipped approximately 3,300 DSS crystallization furnaces. The ingots are used to make photovoltaic (PV) solar wafers and cells. HiCz, or continuous Czochralski (Cz) growth process, produces monocrystalline ingots that are designed to produce more efficient wafers. The Company�� DSS furnace is a specialized furnace used to melt polysilicon and cast multicrystalline ingots. Multicrystalline ingots are used to produce solar wafers, which ultimately become solar cells. The Company markets its DSS crystallization furnaces under the names DSS450HP and DSS6! 50. The Company's largest capacity DSS furnace, the DSS650, is capable of producing ingots that weigh up to 650 kilograms using standard silicon feedstock. In January 2012, the Company introduced its MonoCast silicon casting technology that uses the DSS furnace architecture to produce ingots comprised of a high percentage of monocrystalline material. The Company is markets MonoCast technology under the name DSS450 MonoCast.

The Company�� ancillary equipment provides operators with material handling assistance during the preparation of the crucible before it is loaded with silicon and during the loading and unloading of the crucible into the DSS furnace chamber at the start of the growth process and out of the DSS furnace chamber at the conclusion of the ingot growth process. The Company's ancillary equipment includes crucible coating stations, crucible manipulators, loaders/unloaders, extraction tools and other material handling systems required to safely transport material during the ingot growth process. The Company sells replacement parts and consumables used in its DSS furnaces and other PV equipment.

Polysilicon Business

The Company's polysilicon business offers Silicon Deposition Reactors, which utilize the chemical vapor deposition process, and related trichlorosilane (TCS) technology and equipment along with engineering services to existing polysilicon producers and new market entrants. The Company's polysilicon business focuses on product design, quality control, engineering services, project management and process development related to the production of polysilicon. It markets its SDR reactors under the names SDR300, SDR400, SDR 500 and SDR 600. The Company provides equipment, technology and engineering services for the production and purification of TCSand silane. This hydrochlorination technology eliminates the need for silicon tetrachloride converters which are required when using certain other polysilicon production technology. The Company also pr! ovides an! cillary equipment and technologies for producing seed rods used in its SDR reactors and for handling and processing the polysilicon rods into a finished product.

Sapphire Business

The Company's sapphire business markets and sells of the Company's ASF systems to customers to enable them to produce sapphire material. The Company also produces sapphire material, on a limited basis, for the LED and other specialty markets at its sapphire pilot production facility in Massachusetts. Its ASF systems produce monocrystalline sapphire material, referred to as sapphire boules. The sapphire boules are used to make sapphire wafers, a substrate for manufacturing LEDs, as well as sapphire blanks and windows for such applications as medical devices and watch crystals. The Company's ASF technology is based on the heat exchanger method (HEM), which is a directional solidification technique, which crystallizes the sapphire meltstock material during the growth process. The Company also uses the facility as a research and development (R&D) center to test new technology developments prior to commercial release. The Company markets and sells its ASF systems under the name ASF100. The Company also provides engineering and product design, quality control, process engineering, engineering services and field services related to the operation of its ASF furnaces. The Company produces sapphire material on a limited basis at its pilot production facility in Massachusetts. The Company sells this material to customers in the LED and other markets, such as the aerospace, defenses and medical device.

The Company manufactures and sells two principal types of sapphire materials: hems Sapphire Material and Titanium-doped Sapphire (Ti:Sapphire) Material. Using the material derives from the sapphire boule generated with its ASF furnaces, the Company cut the sapphire material in a number of different dimensions and crystal orientations, in form factors such as cores, rods, blanks, windows and tubes. The! Company ! generates sapphire boules that are doped with titanium. The Company provides certain finishing and polishing for its Ti:Sapphire material.

The Company competes with ALD Vacuum Technologies AG, JYT Corporation, Ferrotec Corporation, PVA TePla AG, Centrotherm Elektrische Anlagen GmbH & Co., Jing Gong Technology, Zhejiang Jingsheng Mechanical & Electrical Co., Ltd, MSA Apparatus Construction for Chemical Equipment Ltd, Centrotherm Elektrische Anlagen GmbH & Co., Morimatsu Industry Co. Ltd., Poly Plant Project, Inc., Hemlock Semiconductor Corporation, Wacker Chemie AG, MEMC Electronic Materials, Inc., Renewable Energy Corporation ASA, Thermal Technology LLC, Advanced Renewable Energy Company, LLC, Rubicon Technology, Inc., Sapphire Technology Co. Ltd. (Korea), Kyocera International Inc., Saint-Gobain, Gavish Inc., and Monocrystal.

Advisors' Opinion:

• [By Rich Bieglmeier]

  Overall: If Stephen Chin is correct that GT Advanced Technologies Inc. (GTAT) sapphire business is at an inflection point, then $10 could prove to be conservative 12-to-18 months from now.

• [By Travis Hoium]

  It's been a long road for GT Advanced Technologies (NASDAQ: GTAT  ) and there are a lot of questions the company faces going forward. When will its technology take off? When will revenue pick up? And when can investors expect to see a profit.

• [By Evan Niu, CFA]

  Apple couldn't hide the acquisition of a publicly traded company. When Apple bought AuthenTec in 2012, fingerprint sensors were clearly in the pipeline for the iPhone. GT Advanced Technology (NASDAQ: GTAT  ) had to disclose its partnership with Apple last November, since the deal had major financial implications for the smaller company and entailed a significant transition in GT's business model. Given the magnitude of this deal, Apple obviously had lofty ambitions for sapphire material.

Top 10 Machinery Stocks For 2014: Stanley Black & Decker Inc (SWJ)

Stanley Black & Decker Inc., June 4, 1901, is a diversified global provider of power and hand tools, mechanical access solutions (automatic doors, commercial and residential locking systems), electronic security and monitoring systems and products and services for various industrial applications. The Company�� operations are classified into three business segments: Construction & Do-It-Yourself (CDIY), Security, and Industrial. In September 2011, Stanley Black & Decker acquired Niscayah Group AB. In September 2011, the Company acquired Microtec Enterprises, Inc. In January 2011, the Company acquired InfoLogix, Inc. In December 2012, Spectrum Brands Holdings Inc acquired Hardware & Home Improvement Group (HHI) of the Company. In February 2013, the Company completed its acquisition of Infastech.

CDIY

The CDIY segment consists of the professional power tool and accessories business, the consumer power tool business, which includes outdoor products, plumbing (Pfister) and the hand tools, fasteners and storage business. The segment sells its products to professional end users, distributors and retail consumers. The majority of sales are distributed through retailers, including home centers, mass merchants, hardware stores, and retail lumber yards. During the year ended December 31, 2011, annual revenues in the CDIY segment represented 50% of the Company�� total revenues. The professional power tool and accessories business sells professional grade corded and cordless electric power tools and equipment, including drills, impact wrenches and drivers, grinders, saws, routers and sanders. The business also sells power tool accessories, which include drill bits, router bits, abrasives and saw blades.

The consumer power tool business sells corded and cordless power tools sold under the Black & Decker brand, lawn and garden products and home products. Lawn and garden products include hedge trimmers, string trimmers, lawn mowers, edgers and related accessories. Home pro! ducts include hand held vacuums, paint tools and cleaning appliances. The hand tools, fasteners and storage business sells measuring and leveling tools, planes, hammers, demolition tools, knives, saws and chisels. Fastening products include pneumatic tools and fasteners including nail guns, nails, staplers and staples. Storage products include tool boxes, sawhorses and storage units.

Security

The Security segment consists of the electronic security solutions and the mechanical access solutions businesses. Annual revenues in the Security segment represented 26% of the Company�� total revenues in 2011. The electronic security solutions business designs, supplies and installs electronic security systems and provides electronic security services, including alarm monitoring, video surveillance, fire alarm monitoring, systems integration and system maintenance. Purchasers of these systems typically contract for ongoing security systems monitoring and maintenance at the time of initial equipment installation. The electronic security business also sells healthcare solutions, which includes medical carts and cabinets, asset tracking solutions, infant protection, pediatric protection, patient protection, wander management, fall management, and emergency call products.

The electronic security solutions business sells to consumers, retailers, educational, financial and healthcare institutions, as well as commercial, governmental and industrial customers. Products are sold predominantly on a direct sales basis. The mechanical access solutions business sells and installs automatic doors, residential and commercial hardware, locking mechanisms, electronic keyless entry systems, keying systems, tubular and mortise door locksets. The mechanical access solutions business sells to both residential and commercial customers, with distribution through direct sales, through retailers (including home centers) and, through third party distributors.

Industrial

!

The In! dustrial segment consists of the industrial and automotive repair tools, engineered fastening and infrastructure businesses. Annual revenues in the Industrial segment represented 24% of the Company�� total revenues. The industrial and automotive repair business sells hand tools, power tools, and engineered storage solution products. The business sells to industrial customers in a variety of industries and geographies. The products are distributed through third party distributors, as well as a direct sales force. The engineered fastening business primarily sells engineered fasteners designed for specific applications. The product lines include stud welding systems, blind rivets and tools, blind inserts and tools, drawn arc weld studs, engineered plastic fasteners, self-piercing riveting systems and precision nut running systems.

The business sells to customers in the automotive, manufacturing, and aerospace industries, amongst others, and the Company's products are distributed through direct sales forces. The infrastructure business consists of the CRC-Evans business, and the Company�� hydraulics business. The business�� product lines include custom pipe handling machinery, joint welding and coating machinery, weld inspection services and hydraulic tools and accessories. The business sells to the oil and natural gas pipeline industry and other industrial customers. The products and services are primarily distributed through a direct sales force.

Advisors' Opinion:

• [By Ben Rooney]

  Stanley Black & Decker (SWJ) tumbled roughly 10% after the power tools maker lowered its full-year earnings outlook. The company said it expected "uncertainty created by the U.S. government's sequestration and shutdown" to hurt business and consumer spending.